Restoration - Manufacturers
ASTROFLAME
Intumescent Strip Fire Only
Fire only seals. Intumescent seals for use where no smoke sealing is required.
Intumescent Strip Fire & Smoke
Fire and smoke seals.Intumescent fire and smoke seals for a safe and effective barrier against fire, cold smoke and hot gases.
Description:
Intumescent fire and smoke seals for fire door assemblies. An ASTRO intumescent graphite based fireseal contained within a PVC sleeve fitted into a rebate to either the leaves or the frame will in the event of a fire expand (intumesce) to many times its original volume and seal the gap around the door to provide a safe and effective barrier against the passage of fire, smoke and hot gases.
Intumescent Twinblade Fire & Smoke
Intumescent fire seal with a black Neoprene twin blade draft seal
Fire Grills
A durable ventilation grille which is easily mounted in doors, ducts, floors & walls, and can provide in excess of 1/2 or 1 hour fire protection. Astroflame Fire Grille comprises of a moisture resistant intumescent core within a galvanized steel frame with vermin proof 6mm steel mesh fitted to both faces. The design allows a free area of 80% approximately. See our table below for guidance.
Face Plates
ASTROflame Face Plate Series presents a Mild Steel Louvered Grilles designed to satisfy all types of air transfer application in offices, shops, schools, hospitals and many other commercial projects. Manufactured using modern press machinery and production techniques the ASTROflame Face Plate Series is robustly fabricated from 2Oswg mild steel and comprises of horizontal louvres set on an 8.5mm pitch with a 30% downward deflection
Fire Blocks
Intumescent Glazing Tape
A flexible self adhesive polymer based extruded intumescent material suitable for sealing wired or fire resistant glazing into wooden fire doors and fire resistant partitions.
On exposure to heat from a fire Astroflame Intumescent tape swells, thus prohibiting smoke and flame from passing through the aperture between wood and glass,providing resistance in excess of 1/2 hour.
Intumescent Glazing U-Channel
U Channel for 6mm glass. Cost effective, easily installed dry glazing gasket for use in fire doors using clear or wired glass. Elastic composition of the channel grips the glass.
15mm tall 10.5mm wide and supplied in 5, 5 or 100 Metre lengths.
Firestop Compound 20g
Fire Collars
Our pipe collars are manufactured from a high performance material bonded to the inside of a steel sleeve, which on exposure to heat from a fire will rapidly expand inwards to squeeze the collapsing plastic pipe until the aperture is completely sealed.
Our pipe collars are light and compact, easy to install, maintenance free and find uses in multi- storey office buildings, flat level developments, hospitals and hotels, and anywhere plastic soil and waste pipes pass through fire compartment walls and floors.
Mineral Fire Boards
Specifically designed for sealing around service penetrations in walls and floors, a single Astroflame board (60mm thick) can provide high levels of fire integrity and insulation offering up to 4 hours resistance in accordance with BS4746: Part 20: 1987.
Astroflame Boards consist of a mineral fibre core coated on both sides with Astroflame Mastic, which transforms into a hard ceramic during a fire to prevent the passage of fire and smoke and the transfer of heat.
Pipe Wraps
Flexible strips of high performance intumescent material encapsulated in a polythene sleeve – designed for wrapping around plastic pipes that pass through masonry floors and walls. on exposure to fire the wrap expands rapidly inwards to squeeze the collapsing plastic pipe until the aperture is completely sealed.
PR EPOXY
Pr solvent free primer
P.R. Solvent Free Primer is based on a blend of Epoxy Resin and Curing Agent binder giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties.
USES:
P.R. Solvent Free Primer is designed for use on a variety of substrates. The substrate is primed prior to the application of P.R. Solvent Free Coating, P.R. Self Levelling Flooring System No 2, P.R. Screed System or P.R. Patch Repair System.
Pr water dispersible anti-static epoxy primer
Water Dispersable Anti-static Epoxy Primer is a 2 part water dispersed epoxy primer/sealer. The product contains no solvents and therefore is not flammable.
USES:
Water Dispersable Anti-static Epoxy Primer is used as a conductive layer prior to the application of anti-static coatings, self- smoothing systems and wall coatings.
Pr epoxy dpm system
P.R. Epoxy – DPM System is a solvent free, two-component epoxy resin and surface damp proof membrane. It is a flexibilised epoxy, containing wetting agents, penetrants, flow agents and defoamers to maximise penetration and adhesion and to minimise pinholes.
Uses:
P.R. Epoxy – DPM System is used to form a surface damp proof membrane and moisture vapour suppressant to concrete/screed floors, it is ideal for fast track building.
Pr solvent free epoxy coating
P. R. Solvent Free Coating is based on a blend of Epoxy Resin and Curing Agent binder, giving a very low odour. The product is supplied as two components, the Epoxy Resin component being pigmented. P.R. Solvent Free Coating has been formulated using fillers and giving high abrasion resistance properties.
Uses:
P.R. Solvent Free Coating is suitable for use where a hard wearing, dust free, hygienic and easy to clean floor topping is required. It is very widely used on industrial or commercial floors in laboratories, showrooms, schools, plant rooms and the food industry.
Pr water dispersible epoxy coating
P.R. Water Dispersable Epoxy Coating is a two part water dispersed epoxy coating. The product can be thinned with water, contains no solvents and therefore is non-flammable, odour free and suitable for application onto damp surfaces.
Uses:
P.R. Water Dispersable Epoxy Coating is suitable for use as an economical protection to concrete surfaces in a wide range of locations such as dairies, abattoirs, food preparation areas and factories. P.R. Water Dispersable Epoxy Coating provides an ideal swimming pool coating for rendered pools giving long life and high wear resistance. The cured material is non-toxic and is suitable for use in the food industry.
Pr self-levelling floor system no. 2.
P.R. Self-Levelling Flooring System No 2 is based on a blend of epoxy resin and curing agent binder giving the low viscosity characteristics necessary to wet the graded fine aggregates and also giving good levelling properties. The easily mixed system provides a 2mm – 4mm thick floor topping with advantages to both contractors and clients. The epoxy resin, curing agent and filler components are supplied pre-weighed and blended ready for use on site. The system is primed by using P.R. Solvent Free Primer, which is also supplied in pre-weighed packs to site.
Uses:
P.R. Self-Levelling Flooring System No 2 is suitable for use where a hard wearing, dust free, hygienic, easy to clean floor topping is required. It is widely used on industrial and commercial floors and in laboratories, showrooms, schools, plant rooms and food factories.
Pr epoxy screed system
P.R. Epoxy Screed System is based on a low odour, solvent free epoxy resin, curing agent and graded aggregates specially selected to give extremely hard- wearing properties.
Uses:
Water Dispersable Anti-static Epoxy Primer is used as a conductive layer prior to the application of anti-static coatings, self- smoothing systems and wall coatings.
C.I.KASEIC
Leakmaster
LEAKMASTER is a one component type water swelling sealant with excellent and unique physical properties. LEAKMASTER was developed based on our technology and long experience in water swelling sealants and rubbers.
SOUDAL
Soudaseal 4 All Paints
Soudaseal 4 All Paint is a high quality single component glazing sealant with high adhesive strength.
Applications:
It is based on MS-Polymer®, chemically neutral and fully elastic. It has especially been formulated for glazing applications which need to be painted and does not contain pthalates.
Silirub PDA
Silirub PDA is a high-quality neutral, elastic onecomponent
joint sealant based on silicones, which
can be painted with a wide range of paints
Applications:
Sealing of joints which must be painted
All glazing jobs
Acryrub
Acryrub is a high-quality, plasto-elastic one component joint sealant based on acrylic dispersions.
Applications:
Joints with movements up to 15%.
Connection joints in the building industry
Joints between windowsills, between skirtingboard
and floor, between brickwork, etc.
Soudaseal 240 FC
Soudaseal 240 FC is a high quality single component joint sealant with high adhesive strength. It is based on MS-Polymer®, chemically neutral and fully elastic.
Applications:
Sealing and bonding in the building industry.
Sealing of floor joints and low movement wall joints.
Structural bonding in vibrating constructions.
Connection joints in sheet metal fabrication, sealing
of air conditioning systems.
Sealing in sanitary applications.
Bonding of security and safety glass.
Supple bonding in carbodies, caravans,
containers…
Brenseal 245
BRENSEAL 245 is a neutral, elastic, single component sealant/adhesive based on advanced MS-Polymers®. Technology.
Applications:
Sealing and bonding in the construction- and metal industries
Structural bonding in vibrating constructions
Sealing in sanitary and kitchen area’s, resists mould growth
Sealing and bonding of natural stone (marble, etc) – non staining
Purocol
Purocol is a fast cure assembly adhesive with high bond strength. Polyurethane based adhesive which cures transparent and is highly water resistant.
Applications:
all bondings on wood
bonding in the furniture industry
bonding of door and windowframes
bonding of insulation materials (including Polystyrene)
bonding of wooden construction elements
Silirub 2
Silirub 2 is a high-quality neutral, elastical onecomponent
joint sealant based on silicones.
Applications:
Building- and construction joints
Topsealing at glazing jobs
Joints with high movement between different
building materials
Sealings between treated wood, metal, PVC
profiles and glass
Silirub Colour
Silirub Color is a high-quality, neutral cure elastical one-component joint sealant based on silicones. It has especially been developed for colour matched sealing based on the RAL System colours
Applications:
All building- and construction joints which require a colour matched sealant
All glazing works on powdercoated aluminium, PVC, painted wood
Topsealing at glazing jobs on powdercoated aluminium, PVC, painted wood etc.
Joints with high movement between different building materials.
Sealings between painted wood, PVC, powdercoated aluminium, etc and brickwork, concrete, etc.
MS30p
MS-30P is a solvent, and water-free universal parquet adhesive.
Suitable for bonding many types of parquet floorsonto suitable indoor substrates.
Applications:
MS-30P is a solvent, and water-free universal parquet adhesive based upon MS Polymers. Suitable for indoor bonding of all types of wooden floors such as solid, stab, pre-finished, and on-end parquet, wood-plank, wood-block and laminates.
Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard) , including floors with underfloor heating.
MS-30P is also extremely suitable for bonding moisture sensitive wood onto moderately porous surfaces.
Parquet Sealant
Parquet Seal is a high-quality, plasto-elastic onecomponent sealant based on polyacrylics.
Applications:
Filling of joints with movements up to 15%.
Filling sealant for joints in parquet-, or laminate floors
Connection joints between parquet floors, skirting board and walls
Also suitable for cracks in wooden floors
Soudafelt
Firecryl
Firecryl FR is a one-component intumescent plastoelastic joint sealant based on acrylic dispersions
Applications:
– Interior fire-resistant applications
– Fire-resistant sealing compound for cracks in concrete and plaster
– Fire-resistant connection joints in the building industry
– Fire-resistant joints with movements up to 10%.
Silirub B1
Silirub 501 B1 is a high quality, neutral, highly elastic, one-component sealant based on silicones which conforms to the DIN4102 B1 standard for fire retardancy and has a fire rating of up to 4 hours in certain joint configurations (tested to BS 476/20).
Applications :
– all usual building joints
– all glazing application
– joints with high fire retardant quali
Calofer (tube of fire cement)
Calofer is a high quality sealing paste based which cures to form a hard joint which withstand temperatures of up to 1500°C
Applications:
Sealing of joints and openings at high temperature areas
Intallation of heating systems, furnaces, etc.
Soudaseal HT
Soudaseal HT is a high quality single component adhesive sealant with high adhesive strength and initial tack. It is based on MS-Polymer®, chemically neutral and fully elastic. For use in construction, automotive, marine and aerospace areas where a tough flexible rubber or adhesive with powerful bond strength is required.
Applications:
Sealing and bonding in the building industry
Sealing of floor joints and low movement wall joints
Sanitary and kitchen areas – resists mould growth
Structural bonding in vibrating constructions
Connection joints in sheet metal fabrication
Paintable gap filler and sealant
Mirror bonding direct onto the back of the mirror