Waterproofing - Designers
ELASTOGRAN
Elastacoat C 6335/101
High reactive 2 component polyurea spray elastomer for covering of mineral and metallic surfaces.
Protective coating for various substrates like steel and concrete. Substrate preparation neccessary
P R EPOXY
Pr solvent free primer
P.R. Solvent Free Primer is based on a blend of Epoxy Resin and Curing Agent binder giving the low viscosity characteristics necessary to wet the substrate, giving good penetration properties.
USES: P.R. Solvent Free Primer is designed for use on a variety of substrates. The substrate is primed prior to the application of P.R. Solvent Free Coating, P.R. Self Levelling Flooring System No 2, P.R. Screed System or P.R. Patch Repair System.
Pr water dispersible anti-static epoxy primer
Water Dispersable Anti-static Epoxy Primer is a 2 part water dispersed epoxy primer/sealer. The product contains no solvents and therefore is not flammable.
Uses:
Water Dispersable Anti-static Epoxy Primer is used as a conductive layer prior to the application of anti-static coatings, self- smoothing systems and wall coatings.
Pr epoxy dpm system
P.R. Epoxy – DPM System is a solvent free, two-component epoxy resin and surface damp proof membrane. It is a flexibilised epoxy, containing wetting agents, penetrants, flow agents and defoamers to maximise penetration and adhesion and to minimise pinholes.
Uses:
P.R. Epoxy – DPM System is used to form a surface damp proof membrane and moisture vapour suppressant to concrete/screed floors, it is ideal for fast track building.
Pr solvent free epoxy coating
P. R. Solvent Free Coating is based on a blend of Epoxy Resin and Curing Agent binder, giving a very low odour. The product is supplied as two components, the Epoxy Resin component being pigmented. P.R. Solvent Free Coating has been formulated using fillers and giving high abrasion resistance properties.
Uses:
P.R. Solvent Free Coating is suitable for use where a hard wearing, dust free, hygienic and easy to clean floor topping is required. It is very widely used on industrial or commercial floors in laboratories, showrooms, schools, plant rooms and the food industry.
Pr water dispersible epoxy coating
P.R. Water Dispersable Epoxy Coating is a two part water dispersed epoxy coating. The product can be thinned with water, contains no solvents and therefore is non-flammable, odour free and suitable for application onto damp surfaces.
Uses:
P.R. Water Dispersable Epoxy Coating is suitable for use as an economical protection to concrete surfaces in a wide range of locations such as dairies, abattoirs, food preparation areas and factories. P.R. Water Dispersable Epoxy Coating provides an ideal swimming pool coating for rendered pools giving long life and high wear resistance. The cured material is non-toxic and is suitable for use in the food industry.
Pr self-levelling floor system no. 2.
P.R. Self-Levelling Flooring System No 2 is based on a blend of epoxy resin and curing agent binder giving the low viscosity characteristics necessary to wet the graded fine aggregates and also giving good levelling properties. The easily mixed system provides a 2mm – 4mm thick floor topping with advantages to both contractors and clients. The epoxy resin, curing agent and filler components are supplied pre-weighed and blended ready for use on site. The system is primed by using P.R. Solvent Free Primer, which is also supplied in pre-weighed packs to site.
Uses:
P.R. Self-Levelling Flooring System No 2 is suitable for use where a hard wearing, dust free, hygienic, easy to clean floor topping is required. It is widely used on industrial and commercial floors and in laboratories, showrooms, schools, plant rooms and food factories.
Pr epoxy screed system
P.R. Epoxy Screed System is based on a low odour, solvent free epoxy resin, curing agent and graded aggregates specially selected to give extremely hard- wearing properties.
Uses:
Water Dispersable Anti-static Epoxy Primer is used as a conductive layer prior to the application of anti-static coatings, self- smoothing systems and wall coatings.
CI KASEIC
Hydrotite CJ type waterbar
Hydrotite CJ-type has been developed as an effective, simple and economical sealing material for site formed construction joints based on the proven effectiveness of Hydrotite.
Leakmaster
LEAKMASTER is a one component type water swelling sealant with excellent and unique physical properties. LEAKMASTER was developed based on our technology and long experience in water swelling sealants and rubbers.
C.I.Aquaseal
C.I. AQUA TACKSEAL is water swelling semi-vulcanized butyl rubber sealing material exclusively developed for joints in precast manholes.
SOUDAL
Soudaseal 215lm
Soudaseal 215LM is a high quality, neutral, elastic single component joint sealant based on MSPolymer.
Applications:
Expansion and connection joints in the building industry: Sealing of joints in prefabricated buildings, movement joints in high rise constructions, sealing between window and door frames,… Flexible joints in marine and automotive applications. Applications that should be painted with water based paints.
Soudaseal 240fc
Soudaseal 240 FC is a high quality single component joint sealant with high adhesive strength. It is based on MS-Polymer®, chemically neutral and fully elastic.
Applications:
Sealing and bonding in the building industry. Sealing of floor joints and low movement wall joints. Structural bonding in vibrating constructions. Connection joints in sheet metal fabrication, sealing of air conditioning systems. Sealing in sanitary applications. Bonding of security and safety glass. Supple bonding in carbodies, caravans, containers…
Soudaseal 270hs
Soudaseal 270HS is a high quality single component adhesive-sealant with high stiffness and very high adhesive strength. It is based on MSPolymer ®, chemically neutral and fully elastic.
Applications:
For use in elastical structural bonding applications in the car-, coach-, caravan-, marine-, train-, aerospace industries where a tough and flexible bond is required. Structural elastic bonding between metal surfaces, coated surfaces and many plastics (not PE, PP, Teflon) Bondings which pass through paint tunnels Structural bonding in vibrating constructions Connection joints in sheet metal fabrication
Silirub 2
Silirub 2 is a high-quality neutral, elastical onecomponent joint sealant based on silicones.
Applications:
Building- and construction joints Topsealing at glazing jobs Joints with high movement between different building materials Sealings between treated wood, metal, PVC profiles and glass
Silirub 2/S
Silirub 2/S is a high-quality neutral, elastic onecomponent joint sealant based on silicones.
Applications:
Joints in sanitary applications and kitchens All glazing works Joints in container and cold-storage applications Air conditioning sealing
Soudaflex 40 FC
Soudaflex 40 FC is a high quality, one component polyurethane sealant with high modulus for a wide range of sealing and bonding applications
Applications:
All sealing and bonding applications in the building industry Structural bondings in vibrating constructions
Brensil 2000
BRENSIL 2000 is a high-quality neutral cure, elastic one-component joint sealant based on silicones
APPLICATIONS:
Building- and construction joints Top sealing at glazing jobs Connection joints and expansion joints Sealing of air conditioning ducts
Brenflex 45P
BRENFLEX 45 is a high quality, one component polyurethane sealant which is high modulus for a wide range of sealing and bonding applications
Applications:
All sealing and bonding applications in the building industry Structural bonding in vibrating constructions
Brenseal 245
BRENSEAL 245 is a neutral, elastic, single component sealant/adhesive based on advanced MS-Polymers®. Technology.
Applications:
Sealing and bonding in the construction- and metal industries Structural bonding in vibrating constructions Sealing in sanitary and kitchen area’s, resists mould growth Sealing and bonding of natural stone (marble, etc) – non staining
Silirub MA
Silirub MA is a high-quality neutral, elastical onecomponent joint sealant based on silicones.
Applications:
Sealing of joints and bonding of marble and other porous natural stones All glazing jobs Bonding and glueing of marble and other porous natural stones on many different substrates Cladding of facades of marble, granite and other natural stones
Epr31 epoxy coating
Epoxy sealer EPR-31P is a 2 component epoxy based sealer.
Applications:
Epoxy Sealer EPR-31P is a solvent, and waterfree two-component epoxy based sealer. EPR-31P suppresses rising damp and residual construction moisture (max. 7% for concrete subfloors and max. 5% for Anhydrite subfloors). Extremely suitable for preliminary treatment of sandy or powdery (highly-) absorbing mineral subfloors such as cement bounded subfloors, concrete, calcium-sulphate bounded (anhydrite)- and levelled subfloors. Also suitable on wooden subfloors, particle size- and chipboard, terrazzo, ceramic tiles and metal.
Silirub B1 (4 hour)
Silirub 501 B1 is a high quality, neutral, highly elastic, one-component sealant based on silicones which conforms to the DIN4102 B1 standard for fire retardancy and has a fire rating of up to 4 hours in certain joint configurations (tested to BS 476/20).
Applications :
– all usual building joints – all glazing application – joints with high fire retardant qualities
[ Back ]